铭宏润滑油脂科技

400-6080-328

文章
  • 文章
搜索
首页 >> 产品中心 >>轴承齿轮链条脂 >> 玖城牌高温齿轮润滑脂 JC High Temperature Gear Lubricating Grease
详细说明

玖城牌高温齿轮润滑脂 JC High Temperature Gear Lubricating Grease

玖城牌高温齿轮润滑脂

产品型号:GH1401 GH1402 GH1403

产品描述:玖城牌高温齿轮润滑脂采用聚脲类稠化剂稠化高粘度酯类合成油,添加多种添加剂用特殊工艺精制而成

产品特点:

的抗氧化性,在高温下无稀释、烧干现象。

优异的耐高温性能,避免在高温运转时油脂流失

优异的极压、抗磨性能和承载能力,能长效减少齿轮磨损

出色的粘附性和耐高速性,坚韧的油膜在齿轮运行中不会破坏或被甩出

产品应用:

用于高转速的减速电机金属齿轮以及蜗轮、蜗杆的润滑及减噪音

用于高温高速工况下的齿轮、滑轮、导轨、链条、轴承传动装置的润滑。

各种工业设备滚动与滑动摩擦部件,高速齿轮传动装置,链条、离合器的润滑。

使用温度:-30℃~260℃


产品简介
玖城牌高温齿轮润滑脂采用聚脲类稠化剂稠化高粘度酯类合成油,添加多种添加剂用特殊工艺精制而成。JC High temperature gear lubricating grease is manufactured by polyurea thickening agent thickened high viscosity ester synthetic oil,and add a variety of additives to be refined by special process.
收藏
产品编号 GH1401 GH1402 GH1403
  • 产品说明
  • 产品参数


JC High Temperature Gear Lubricating Grease

Product number:GH1401 GH1402 GH1403

product description:JC High temperature gear lubricating grease is manufactured by polyurea thickening agent thickened high viscosity ester synthetic oil,and add a variety of additives to be refined by special process.

Performance characteristics:

Excellent oxidation resistance, no the phenomenon of dilution and drying at the high temperature.

Excellent high temperature resistance to avoid grease loss at high temperature.

Excellent extreme pressure, abrasion resistance and bearing capacity can reduce gear wear .

Excellent adhesion and high speed resistance. Tough oil film will not be destroyed or thrown out in gear operation.

Recommended use:

Used for high speed reduction motor metal gear and worm gear, worm lubrication and noise reduction.

It is used for lubrication  of gears, pulleys, guideways, chains and bearing transmission units at the high temperature and high speed.

Lubrication of various industrial equipment rolling and sliding parts, high speed gear trains, chains and clutches.

Temperature range:-30℃ to 260


玖城牌高温齿轮润滑脂的典型数据Typical data of JC High temperature gear lubricating grease:

项目Project

典型数据Typical data

工作锥入度/0.1mm 60 Penetration 1/10mm 60 times

235--285

滴点,  Drop point,℃

340

铜片腐蚀(T2.100.24h Copper corrosionT2.100.24h

合格PASS

水淋流失量(79,1h Sprinkling loss79,1h%

1.0

钢网分油(100,24h Steel mesh oil filtering100,24h%

1.0

防腐蚀性(52,48h Corrosion resistance52,48h

合格 PASS

极压性能(四球机法)Pa/kg  Extreme pressure performance (4-ball test)Pa/kg

490

抗磨性能(四球机法)(40kg,60min)/mm

Antiwear performance (4-ball test)40kg,60min)/mm

0.42

蒸发度(120,m/m Evaporativity120,m/m%

≤1

EMCOR防锈实验,10%合成海水

EMCOR antirust experiment, 10% synthetic sea water

0.0(无锈)

(No rust)

适用工作温度 Applicable working temperature 

-30--+260

标题
更多
联系方式
留言内容.....

联系我们

24小时服务热线

400-6080-328

电话:0512-68792639

邮箱:m@jc.hk.cn

QQ:1185166919

地址:苏州市吴中区前珠路1号2幢

底部导航

在线留言

关注我们

×
seo seo